Kill Command for named in Bind

killall -s KILL named

This kills the process when named is running and will not stop with

killall named from the command line.

Linux essential shortcuts and sanity commands

Switch to the first text terminal. Under Linux you can have several (6 in standard setup) terminals opened at the same time.
(n=1..6)
Switch to the nth text terminal.

tty
Print the name of the terminal in which you are typing this command.

Switch to the first GUI terminal (if X-windows is running on this terminal).

(n=7..12)
Switch to the nth GUI terminal (if a GUI terminal is running on screen n-1). On default, nothing is running on terminals
8 to 12, but you can run another server there.

(In a text terminal) Autocomplete the command if there is only one option, or else show all the available options.
THIS SHORTCUT IS GREAT! It even works at LILO prompt!

Scroll and edit the command history. Press to execute.

Scroll terminal output up. Work also at the login prompt, so you can scroll through your bootup messages.

Scroll terminal output down.

< +>
(in X-windows) Change to the next X-server resolution (if you set up the X-server to more than one resolution). For multiple resolutions on my standard SVGA card/monitor, I have the following line in the file /etc/X11/XF86Config (the first resolution starts on default, the largest determines the size of the “virtual screen”):
Modes “1024×768″ “800×600″ “640×480″ “512×384″ “480×300″ “400×300″ “1152×864″

< ->
(in X-windows) Change to the previous X-server resolution.

(in X-windows) Kill the current X-windows server. Use if the X-windows server crushes and cannot be exited normally.

Shut down the system and reboot. This is the normal shutdown command for a user at the text-mode console. Don’t just press the “reset” button for shutdown!

c
Kill the current process (mostly in the text mode for small applications).

d
Log out from the current terminal. See also the next command.

d
Send [End-of-File] to the current process. Don’t press it twice else you also log out (see the previous command).

s
Stop the transfer to the terminal.

q
Resume the transfer to the terminal. Try if your terminal mysteriously stops responding.

z
Send the current process to the background.

exit
Logout. I can also use logout for the same effect. (If you have started a second shell, e.g., using bash the second shell will be exited and you will be back in the first shell, not logged out.)

reset
Restore a screwed-up terminal (a terminal showing funny characters) to default setting. Use if you tried to “cat” a binary file. You may not be able to see the command as you type it.

Paste the text which is currently highlighted somewhere else. This is the normal “copy-paste” operation in Linux. (It doesn’t work with Netscape and WordPerfect which use the MS Windows-style “copy-paste”. It does work in the text terminal if you enabled “gpm” service using “setup”.) Best used with a Linux-ready 3-button mouse (Logitech or similar) or else set “3-mouse button emulation”).

~
(tilde) My home directory (normally the directory /home/my_login_name). For example, the command cd ~/my_dir will change my working directory to the subdirectory “my_dir” under my home directory. Typing just “cd” alone is an equivalent of the command “cd ~”.

.
(dot) Current directory. For example, ./my_program will attempt to execute the file “my_program” located in your current working directory.

..
(two dots) Directory parent to the current one. For example, the command cd .. will change my current working directory one one level up.

Common Linux commands–system info
pwd
Print working directory, i.e., display the name of my current directory on the screen.
hostname
Print the name of the local host (the machine on which you are working). Use netconf (as root) to change the name of the machine.

whoami
Print my login name.

id username
Print user id (uid) and his/her group id (gid), effective id (if different than the real id) and the supplementary groups.

date
Print or change the operating system date and time. E.g., I could change the date and time to 2000-12-31 23:57 using this command:
date 123123572000
To set the hardware (BIOS) clock from the system (Linux) clock, use the command (as root) setclock

time
Determine the amount of time that it takes for a process to complete + other info. Don’t confuse it with the date command. E.g. I can find out how long it takes to display a directory content using:
time ls

who
Determine the users logged on the machine.

rwho -a
(=remote who) Determine all users logged on your network. The rwho service must be enabled for this command to run. If it isn’t, run setup as root to enable “rwho”.

finger user_name
System info about a user. Try: finger root

last
Show listing of users last logged-in on your system.

history | more
Show the last (1000 or so) commands executed from the command line on the current account. The “| more” causes the display to stop after each screenful.

uptime
Show the amount of time since the last reboot.

ps
(=print status) List the processes currently run by the current user.

ps axu | more
List all the processes currently running, even those without the controlling terminal, together with the name of the user that owns each process.

top
Keep listing the currently running processes, sorted by cpu usage (top users first). In KDE, you can get GUI-based Ktop from “K”menu under “System”-”Task Manager” (or by executing “ktop” in an X-terminal).

uname -a
(= Unix name with option “all”) Info on your (local) server. I can also use guname (in X-window terminal) to display the info more nicely.

free
Memory info (in kilobytes).

df -h
(=disk free) Print disk info about all the filesystems (in human-readable form)

du / -bh | more
(=disk usage) Print detailed disk usage for each subdirectory starting at the “/” (root) directory (in human legible form).

cat /proc/cpuinfo
Cpu info–it show the content of the file cpuinfo. Note that the files in the /proc directory are not real files–they are hooks to look at information available to the kernel.

cat /proc/interrupts
List the interrupts in use.

cat /proc/version
Linux version and other info

cat /proc/filesystems
Show the types of filesystems currently in use.

cat /etc/printcap
Show the setup of printers.

lsmod
(As root. Use /sbin/lsmod to execute this command when you are a non-root user.) Show the kernel modules currently loaded.

set|more
Show the current user environment.

echo $PATH
Show the content of the environment variable “PATH”. This command can be used to show other environment variables as well. Use “set” to see the full environment.

dmesg | less
Print kernel messages (the content of the so-called kernel ring buffer). Press “q” to quit “less”. Use less /var/log/dmesg to see what “dmesg” dumped into this file right after the last system bootup.

Basic operations
any_command –help |more
Display a brief help on a command (works with most commands). “–help” works similar to DOS “/h” switch. The “more” pipe is needed if the output is longer than one screen.
man topic
Display the contents of the system manual pages (help) on the topic. Try man man first. Press “q” to quit the viewer. The command info topic works similar and may contain more up-to-date information. Manual pages can be hard to read. Try any_command –help for short, easy to digest help on a command. If more info needed, have a look to the directory /usr/doc. To display manual page from a specific section, I may use something like in this example: man 3 exit (this displays an info on the command exit from section 3 of the manual pages).

apropos topic
Give me the list of the commands that have something to to do with my topic.

help command
Display brief info on a bash (shell) build-in command.

ls
List the content of the current directory. Under Linux, the command “dir” is an alias to ls. Many users have “ls” to be an alias to “ls –color”.

ls -al |more
List the content of the current directory, all files (also those starting with a dot), and in a long form. Pipe the output through the “more” command, so that the display pauses after each screenful.

cd directory
Change directory. Using “cd” without the directory name will take you to your home directory. “cd -” will take you to your previous directory and is a convenient way to toggle between two directories. “cd ..” will take you one directory up.

cp source destination
Copy files. E.g., cp /home/stan/existing_file_name . will copy a file to my current working directory. Use the “-r” option (for recursive) to copy the contents of whole directories, e.g. , cp -r my_existing/dir/ ~ will copy a subdirectory under my current working directory to my home directory.

mcopy source destination
Copy a file from/to a DOS filesystem (no mounting necessary). E.g., mcopy a:\autoexec.bat ~/junk . See man mtools for related commands: mdir, mcd, mren, mmove, mdel, mmd, mrd, mformat ….

mv source destination
Move or rename files. The same command is used for moving and renaming files and directories.

ln source destination
Create a hard link called destination to the file called source. The link appears as a copy of the original files, but in reality only one copy of the file is kept, just two (or more) directory entries point to it. Any changes the file are automatically visible throughout. When one directory entry is removed, the other(s) stay(s) intact. The limitation of the hard links are: the files have to be on the same filesystem, hard links to directories or special files are impossible.

ln -s source destination
Create a symbolic (soft) link called “destination” to the file called “source”. The symbolic link just specifies a path where to look for the file. In contradistinction to hard links, the source and destination don’t not have to tbe on the same filesystem. In comparison to hard links, the drawback of symbolic links are: if the original file is removed, the link is “broken”, symbolic links can also create circular references (like circular references in spreadsheets or databases, e.g., “a” points to “b” and “b” points back to “a”).

rm files
Remove (delete) files. You must own the file in order to be able to remove it. On many systems, you will be asked or confirmation of deleation, if you don’t want this, use the “-f” (=force) option, e.g., rm -f * will remove all files in my current working directory, no questions asked.

mkdir directory
Make a new directory.

rmdir directory
Remove an empty directory.

rm -r files
(recursive remove) Remove files, directories, and their subdirectories. Careful with this command as root–you can easily remove all files on the system with such a command executed on the top of your directory tree, and there is no undelete in Linux (yet). But if you really wanted to do it (reconsider), here is how (as root): rm -rf /*

cat filename | more
View the content of a text file called “filename”, one page a time. The “|” is the “pipe” symbol (on many American keyboards it shares the key with “\”) The pipe makes the output stop after each screenful. For long files, it is sometimes convenient to use the commands head and tail that display just the beginning and the end of the file. If you happened to use “cat” a binary file and your terminal displays funny characters afterwards, you can restore it with the command “reset”.

less filename
Scroll through a content of a text file. Press q when done. “Less” is roughly equivalent to “more” , the command you know from DOS, although very often “less” is more convenient than “more”.

pico filename
Edit a text file using the simple and standard text editor called pico.

pico -w filename
Edit a text file, while disabling the long line wrap. Handy for editing configuration files, e.g. /etc/fstab.

find / -name “filename”
Find the file called “filename” on your filesystem starting the search from the root directory “/”. The “filename” may contain wildcards (*,?).

locate filename
Find the file name of which contains the string “filename”. Easier and faster than the previous command but depends on a database that normally rebuilds at night.

./program_name
Run an executable in the current directory, which is not on your PATH.

touch filename
Change the date/time stamp of the file filename to the current time. Create an empty file if the file does not exist.

xinit
Start a barebone X-windows server (without a windows manager).

startx
Start an X-windows server and the default windows manager. Works like typing “win” under DOS with Win3.1

startx — :1
Start another X-windows session on the display 1 (the default is opened on display 0). You can have several GUI terminals running concurrently. Switch between them using , , etc.

xterm
(in X terminal) Run a simple X-windows terminal. Typing exit will close it. There are other, more advanced “virtual” terminals for X-windows. I like the popular ones: konsole and kvt (both come with kde) and gnome-terminal (comes with gnome). If you need something really fancy-looking, try Eterm.

xboing
(in X terminal). Very nice, old-fashioned game. Many small games/programs are probably installed on your system. I also like xboard (chess).

shutdown -h now
(as root) Shut down the system to a halt. Mostly used for a remote shutdown. Use for a shutdown at the console (which can be done by any user).

halt
reboot
(as root, two commands) Halt or reboot the machine. Used for remote shutdown, simpler to type than the