Copy IOS for Flash card to Flash Card.

copy slot0: slot1:

cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc
cccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc

This works great, howerver, if you type delete xxx file it will not clear the blocks on the card.  I had to format (format slot1:) in order for me to copy the IOS on to the card.  When I type delete it would not free up space on the card.

I use kermit with a USB serial to USB cable.

kermit

set line /dev/ttyUSB0

set speed 9600

set stop-bits 1

set parity none

set flow control none

set carrier-watch off

connect

Same for windows Hyperterminal.

once the router boots to rom

rommon 1> confreg 0×2142 (make sure your router has this)

rommon 2> reset

then once the router reboots then a setup will occur.

do a config t